Clock/Timer; Setting The Clock; Setting The Sleep Timer - Philips FWM185/55 User Manual

Clock/Timer

Setting the clock

1
In standby mode, press and hold CLOCK.
➜ The clock digits for the hours flash.
2
Adjust the VOLUME control knob or press
VOLUME 3/4 on the remote control to set
the hours.
3
Press CLOCK.
➜ The clock digits for the minutes flash.
4
Adjust the VOLUME control knob or press
VOLUME 3/4 on the remote control to set
the minutes.
5
Press CLOCK to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.
18

Setting the sleep timer

The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press TIMER/SLEEP on the
remote control repeatedly until the desired
timer option appears.
➜ Selections are as follows (time in minutes):
SLPOFF=SLP120=SLP90=SLP60
=SLP45=SLP30=SLP15=SLPOFF
➜ Display shows
deactivated.
2
To cancel the sleep function, either press
TIMER/SLEEP on the remote control once or
more until "SLPOFF" appears, or press
STANDBY-ON y to switch to standby mode.
To check the remaining length of time
after sleep timer is activated
● Press TIMER/SLEEP once.
if activated, and disappears if