Commands From Change Requests Tc/Ac/Mc35; New Features For Tc35I Only - Misc; Siemens Defined At Commands For Enhanced Functions; List Of Unsupported At-Commands - Siemens TC35i Migration Manual

TC35i: Migration from TC35 to TC35i
P R E L I M I N A R Y
# AT
8 AT+CIND Indicator Control

Commands from change requests TC/AC/MC35

5.3.3

Table 5-8: AT commands from change requests

# AT
9 AT^SRTC Select, query and test ringing tones
New features for TC35i only – misc.
5.3.4

Table 5-9: New TC35i features

# AT
10 AT\V Configure CONNECT Response
11 AT^SAIC Audio Interface Configuration
12 AT^SMOND Monitoring
13 AT^SSR SIM READY
14 AT%D Automatic dial on DTR line activation
15 AT+ICF Set TE-TA control character framing
16 AT+IFC Set TE-TA local data flow control
17 AT+CMMS More Messages to Send

Siemens defined AT commands for enhanced functions

5.3.5

Table 5-10: New Siemens defined AT commands

# AT
18 AT^SNFA Set or query of microphone attenuation
19 AT^SLMS List Memory Storage
20 AT^SBV Battery Voltage
21 AT^SPBD Delete the given Phonebook
5.4

List of unsupported AT-Commands

TC35i supports the entire TC35 AT command set.
5.5

List of AT-Commands for V.25ter compatibility

These commands return "OK" but have no functionality in both TC35i and TC35.

Table 5-11: V.254ter compatibility commands

# AT
1 ATL Set monitor speaker loudness
2 ATM Set monitor speaker mode
3 ATP Select pulse dialling
4 ATS2* Escape code sequence
5 ATS6 Set pause before blind dialling
6 ATS8 Set number of seconds to wait for comma dial modifier
7 ATT Select tone dialling
TC35_TC35i_MIG_01_V01.01
Command
Command
Command
Command
Command
29.1.2003 Page 33 of 34