Express Defrost With Memory; Manual Operation; Single Stage Cooking; Multi Stage Cooking - Sharp R-1900J Operation And Cooking Manual

Express Defrost with Memory

* Suppose you want to cook with memory 0, which was
programmed for 10 minutes Express Defrost sequence,
Single Digit Input/Auto Start ON.
1 Place food in oven.
Enter memory number.
Midway through the defrosting cycle, the CHECK
indicator will light in the display and an audible signal
will be heard unless signal volume has been set to Mute.
You may open the door, turn food over and shield any
warm portions. Close the door.

MANUAL OPERATION

Your oven can be programmed for up to 4 cooking sequences
and has 11 preset microwave power levels.
Maximum Cooking Time
Microwave 100% - 60%
Microwave 50% - 10%
(Please see Maximum Cooking Time on page 19)
Microwave Power Level
Press the
POWER LEVEL pad
once then press
POWER LEVEL
9
8
7
6
5
4
3
2
1
0

Single Stage Cooking

* Suppose you want to cook for 2 minutes and 30 seconds
at 50%.
1 Place food in oven and press
the MANUAL/REPEAT pad.
Enter cooking time.
2 Press the POWER LEVEL pad
and enter power level.
3 Press the START pad.
R-1900J [EN].indd Sec1:7 R-1900J [EN].indd Sec1:7
Procedure
0
Maximum of 60 minutes
Maximum of 120 minutes
Approximate
Display
percentage
of power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Procedure
2 3 0
5
Procedure
2 Press the START pad to continue
defrosting.
NOTES:
1. Even though CHECK lights up in the display, your oven
continues defrosting and does not stop to check.
2. Press the START pad at step 2 to continue defrosting as
once the door is closed, cooking data will be canceled if
the START pad is not pressed within 3 minutes.
3. See Express Defrost Chart on page 8.
NOTES:
1. It is not necessary to press the POWER LEVEL pad for
100% in Single Stage Cooking.
2. If cooking time input is over the maximum allowed time,
error message EE9 will be displayed. Press the STOP/
CLEAR pad to clear the error message and reduce cooking
time or power level. For details, see Maximum Cooking
Time on page 19.

Multi Stage Cooking

* Suppose you want to cook for 1 minute at 70% power for
1st stage and then continue to cook for 2 minutes at 50%
power for 2nd stage and to cook for 3 minutes at 100%
power for 3rd stage.
Procedure
1 Place food in oven and press
the MANUAL/REPEAT pad.
Enter cooking time for 1st
stage.
2 Press the POWER LEVEL pad.
Enter power level for 1st stage.
3 Press the MANUAL/REPEAT pad.
Enter cooking time for 2nd
stage.
4 Press the POWER LEVEL pad.
Enter power level for 2nd stage.
5 Press the MANUAL/REPEAT pad.
Enter cooking time for 3rd
stage.
6 Press the START pad.
7
1 0 0
7
2 0 0
5
3 0 0
4/28/09 10:01:26 AM 4/28/09 10:01:26 AM