Service Call Check; Specifications - Sharp R-1900J Operation And Cooking Manual

SERVICE CALL CHECK

Please check the following before calling for service:
1. When the door is opened, does the oven lamp come on?
2. Place one cup of water (approx. 250 ml) in a glass measure in the oven and close the door securely.
Programme the oven for 30 seconds at 100%.
A. Does the oven lamp light up during cooking?
B. Does the "ON" indicator come on?
C. At the end of 30 seconds, is the water hot?
If "NO" is the answer to any of the above questions, please check your wall socket and the fuse in your meter box.
If both the wall socket and the fuse are functioning properly, CONTACT YOUR NEAREST SERVICE CENTRE APPROVED BY
SHARP.
INPORTANT:
If the display shows nothing even if the power supply plug is properly connected, the oven may have shut down
automatically.
Open the oven door to operate the oven. See Before Operation on page 5.
NOTE:
If time in the display is counting down very rapidly, check Demonstration Mode on page 19.

SPECIFICATIONS

AC Line Voltage:
AC Power Required:
Output Power:
Microwave Frequency:
Outside Dimensions:
Depth with the door open:
Cooking Uniformity:
Weight:
* When tested in accordance with AS/NZS 2895.1:2007
** This is the classifi cation of ISM(Industrial, Scientifi c and Medical) equipment described in the International Standard
CISPR 11.
R-1900J [EN].indd Sec1:22 R-1900J [EN].indd Sec1:22
→ →
Single phase 230-240 V, 50 Hz
2.8 kW
1900 W *(IEC test procedure)
2450 MHz **(Class B/Group2)
445mm(W) x 346mm(H) x 573mm(D) (Single)
445(W) x 692(H) x 573(D) (Two ovens stacked)
932 mm
Rotary antenna system
Approx. 33.5 kg
22
YES ________ NO _________
YES ________ NO ________
YES ________ NO ________
YES ________ NO ________
4/28/09 10:01:30 AM 4/28/09 10:01:30 AM