Audio Settings; Switching Loudness On/Off; Volume Distribution Settings; Balance Settings - Blaupunkt ALICANTE CD30 Operating Instructions Manual

To set the bass, press the AUDIO
button 9.
"BASS" appears in the display.
Press the or
adjust the bass.
To set the treble, press the AUDIO
button 9.
"BASS" appears in the display.
Press the AUDIO button 9 again.
"TREBLE" appears in the display.
Press the or
adjust the treble.
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are increased at lower volume
levels.
Press the AUDIO button 9 for
approximately 2 seconds.
LD lights up in the display when loud-
ness is switched on.
The loudness level can be set in steps
ranging from 1 to 6.
Press the MENU button <.
Keep pressing the
until "LOUDNESS" appears in the
display.
Press the or
the level.
Press the MENU button <.
38
button : to
button : to
button :
button : to set
To set the balance, press the GEO
button ;.
"BAL" appears in the display.
Press the or
adjust the balance (right/left).
To set the fader, press the GEO
button ;.
"BAL" appears in the display.
Press the GEO button ; again.
"FADER" appears in the display.
Press the or
adjust the fader (front/back).
button : to
button : to