Reset To Factory Defaults - ADC MM701G2 User Manual

Chapter 9: Managing the Modem
Step
4 Click Update Flash when prompted.
5 Click Restart when prompted.

Reset to Factory Defaults

When you configure the modem, you change the factory default settings to new values. You can return these
parameters to their default values to provide a known starting point if you are troubleshooting or if you simply want to
configure new parameters. For session default values, see
There are three ways to reset the modem to its factory default values:
• Using the Web Interface (below)
9-12
Action
Figure 9-10. Updating Flash
Figure 9-11. Software Upgrade Complete
"Default Session Parameter Values" on page
April 14, 2006
B-4.
MM70xG2-UM-03