View Atm Statistics - ADC MM701G2 User Manual

April 14, 2006
V ATM S
IEW TATISTICS
The ATM Statistics page provides information about the cells that are transmitted on the ATM layer.
Step
1 Select System on the menu bar, then select ATM Statistics under Status to access the ATM Statistics
page (Figure 9-6).
2 View the current statistics as described below.
• Rx Cell
Indicates the total number of cells received by the modem on the DSL interface.
• Tx Cell
Indicates the total number of cells transmitted by the modem over the DSL interface.
• Cell Drop
Indicates the total number of cells dropped by the modem.
• Cell Delineation Flag
Indicates if cell delineation errors have occurred on the modem. A 0 indicates that no errors have
occurred A 1 indicates that errors have occurred.
• Rx HEC Errors
Indicates the total number of received ATM cells marked with uncorrectable header errors as indicated
in the header-error control (HEC) byte.
3 Click one of the following, if appropriate:
• Clear—resets all the counters to zero.
• Refresh—updates the page with more current error counts.
MM70xG2-UM-03
Action
Figure 9-6. ATM Statistics
Chapter 9: Managing the Modem
9-7