Table of Contents
Advertisement
R
ESTORING
When you configure the MM701G, you change the factory default settings to new values. You
can return these parameters to their default values to provide a known starting point if you are
troubleshooting or you simply want to configure new parameters.
Active links may be lost when you reset to factory default values.
1
From the
Main Menu
Configuration
WARNING - This will delete configuration and return to default
2
Do one of the following:
•
Select
Continue
•
Select
Cancel
If you restore the factory defaults, save the changes by selecting
the Main Menu as described in
MM701G User Manual
F
D
ACTORY
, select
Restore Factory Configuration
page.
1. Continue
2. Cancel
if you want to return all values to their original factory values.
if you do not want to return all values to their original factory values.
"Saving the Current Configuration" on page
Chapter 4: Managing the Modem Using the Console Port & Telnet
EFAULTS
to access the
Select (Return to exit) ->
Restore Factory
Save Current Configuration
60.
from
59
Advertisement
Table of Contents
