Connecting To A Multi-Channel Audio/(Video); Receiver With 6 Connectors; Inserting Batteries Into The Remote Control - Philips DVD580M/751 User Manual

Connecting to a Multi-channel
Audio/(Video) receiver with 6
connectors
This player contains a multi-channel decoder and
it enables playback of DVDs recorded in Multi-
channel.
1
Connect the audio Left and Right outputs for
Front speaker connection (1) to the
corresponding input sockets on your receiver
using the audio cable supplied.
2
Connect the audio Left and Right outputs for
Surround speaker connection (2) to the
corresponding inputs on your receiver using an
optional audio cable.
3
Connect the audio outputs for Center speaker
and Subwoofer connection (3) to the
corresponding inputs on your receiver using an
optional audio cable.
4
In the CHANNEL SETUP menu, select
DOWNMIX to OFF.
5
The 6CH function is now enable (see 'Setup
Menu').
Note:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should be
connected directly to the subwoofer.
TO S-VIDEO TO VIDEO IN
IN
TO SCART IN
OR OR
TV OUT
S-VIDEO VIDEO
12V
AMPLIFIER
1 2 3
FL SL Center Multi-5.1
COAXIAL OPTICAL
FR SR Sub-W
Inserting batteries into the
Remote Control
1
Open the battery cover.
2
Insert batteries (AA size) with the correct
polarity as indicated by the + and - symbols
inside the battery compartment.
3
Close the cover.
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly
and kept away from children.
Using the Remote Control
Direct the remote control at the remote sensor
of the DVD player.
Do not drop the remote control.
Do not leave the remote control near extremely
hot or humid place.
Do not spill water or put anything wet on the
remote control.
Preparation
13