Connecting The Power Cord; Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Decorder - Philips DVP3146X Manual

Connections

Connecting the power cord

After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
"– – –" may appear on the display
panel.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-44_dvp3146_94_eng1.indd 12 01-44_dvp3146_94_eng1.indd 12
(continued)
DIGITAL
CENTER REAR L FRONT L OUT TV OUT
SUBWOOFER REAR R FRONT R
COAXIAL
AUDIO OUT COMPONE
A
B
C
Connecting to a Multi
Channel Receiver
MULTICHANNEL AUDIO IN
CENTER REAR FRONT
SUBW. REAR FRONT
DIGITAL
REAR L FRONT L TV OUT
CENTER OUT
REAR R FRONT R
SUBWOOFER COAXIAL
AUDIO OUT COMPONENT VIDEO OUT
Receiver has a Dolby Digital
decoder
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input jacks on your
receiver (cable not supplied).
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your receiver
(cable not supplied).
Tip:
– If the subwoofer has its own amplifi er,
connect directly to the subwoofer Audio Out
on the DVD Player.
2007-01-31 1:23:34 PM 2007-01-31 1:23:34 PM