Helpful Hints - Philips DV910VHS98 Owner's Manual

DV910(H9100).QX33 01.8.9 10:26 AM
30 Remote Control Buttons (cont'd)
Press during disc playback to set a Marker, which will give you quick
access to points that you select on a Disc. Details are on page 71.
Press to set up programmed or random playback
Press to select DVD mode or VCR mode.The red DVD OUT-
PUT light will appear on the front of the DVD/VCR when it is
in DVD mode.The green VCR OUTPUT light will appear on
the front of the DVD/VCR when it is in VCR mode.
Press to skip Chapters or Tracks. Details are on pages 57-58.
Press once to start a recording. Details are on page 33. Or, press
repeatedly to start a One-Touch Recording. Details are on page 35.
Press to directly select a Track (Audio CD) for playback.
Cable Users: Enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 6, press 0,6. If
you only press the Number 6 button, channel 6 will be selected
after a brief delay. (There also may be a brief delay when you
select channels 10, 11, and 12.) If you want to select channels 100
and above, enter channel numbers as a three-digit number. For
example, to select channel 117, press number buttons 1, 1, 7.
Antenna Users: Enter channel numbers as a two-digit number
for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.You may only select channels 2-69.
Press to memorize a tape position at which the real-time counter
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. Make sure the DVD/VCR is in DVD mode by pressing the OUTPUT SELECT but-
ton so that the red DVD OUTPUT light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. Make sure the DVD/VCR is in VCR mode by pressing the OUTPUT SELECT button so
that the green VCR OUTPUT light appears on the front of the DVD/VCR.
Page 30
for an Audio CD. Details are on pages 62-63.
OUTPUT SELECT Button
SKIP/CHANNEL Buttons
Press to change TV channels at the DVD/VCR.
REC(ord)/OTR Button
Press to program Tracks (Audio CD) for playback.
Use to set up VCR features (such as the clock).
Press to select TV channels at the DVD/VCR.
was set to 0:00:00. Details are on page 42.

Helpful Hints

MARKER Button
MODE Button
DVD mode
VCR mode
Number Buttons
DVD mode
Details are on page 57.
Details are on page 62.
VCR mode
MEMORY Button
POWER
MARKER
SETUP AUDIO SUBTITLE ANGLE
MENU TITLE
OK
MODE RETURN
OUTPUT SELECT
DVD VCR
SKIP/CHANNEL CHANNEL/SKIP
K /G
H/ L
B
E
D
C
REC
F
/OTR
A-B
CLEAR
REPEAT
DISPLAY
1 2 3
STATUS/EXIT
SEARCH MODE
4 6
5
TIME SEARCH
SLOW
8 9
7
ZOOM
+ 10
0
TIMER SET VCR/TV MEMORY SPEED