Philips DVD870PH98 Owner's Manual page 11

1
Connect the (Y/C) S-VIDEO OUT jack of the DVD Player
to the S-VIDEO IN jack on the TV. Use an S-Video cable
(not supplied).
2
Connect the supplied red and white audio cables to one
set of the Left and Right AUDIO OUT jacks on the DVD
Player. Connect the other end of the cables to the
left/right AUDIO IN jacks on the TV. Match the cable colors
to the jack colors.
3
Connect the power cords of the DVD Player and the TV
to the power outlet. Turn on the power of the TV and
the DVD Player.
4
Set the TV to the correct S-Video In channel. This channel
might be near channel 00. See your TV owner's manual for
details. Or, continue to change channels at the TV until you
see the DVD Player's screen saver on the TV screen.
Connecting to a TV Only
TV has an S-Video In Jack
2
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
COAXIAL OPT OUT SUB WF OUT
Hookups (cont'd) 11
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1 1
L
2 2
P /C P /C Y
R L (CVBS) R R B B
AUDIO OUT VIDEO OUT VIDEO OUT S-VIDEO OUT
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
(Y/C)