IVT FB-01 Operating Instructions Manual page 4

You may switch on/off the voltage converter both directly on the voltage converter and with the FB-01. Please ensure
Note:
that the voltage converter is switched on even if only one of both switches (on the device or on the remote control) is set to the
corresponding position (ON).
If you intend to use the remote control, the switch on the voltage converter should always be in the "OFF" position. Then, you
may use the remote control as required.
Attention: The voltage converter is shut down completely (without current) only if both switches on the voltage
converter and on the remote control are in „OFF"position!
LED indicators
The LED control indicators 2 (DC input) and 3 (AC output) provide important information on the operating status of your
converter. Both LEDs work independently from one another. I.e., a failure in the DC input area has direct impact on the function
of the AC output; or a failure in the output area affects the input function directly.
Operating status/ fault indicators
Device is switched on and ready for operation
Early warning for deep discharge protection
Cut-off due to deep discharge protection
Overvoltage on the input
Short-circuit or overload on output
Technical specifications
Connection cable length:
Dimensions:
Weight:
Environmental protection note
At the end of its useful life, this product must not be disposed of together with normal household waste, but has to be dropped off at a collection
centre for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, on the instruction manual or on the
packaging.
The materials of which this product is made are recyclable pursuant to their labeling. With the reuse, the recycling of the materials or other forms of
scrap usage you are making an important contribution to the protection of the environment. Please ask your local administration office for the
appropriate disposal center.
Technical specifications are subject to change. We assume no liability for typographical errors 07/2010
Phone: 09622-719910, fax: 09622-7199120; Info@IVT-Hirschau.de;
1. Socket
2. LED control indicator for DC input
3. LED control indicator for AC output
4. On/Off switch
4.0 m
50 x 38 x 28 mm
60 g
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
LED 2 (DC input)
Lights up (green)
Slow blinking (green)
Fast blinking (green)
Fast blinking (green)
Fast blinking (green)
www.IVT-Hirschau.de
LED 3 (AC output)
Lights up (green)
Lights up (green)
Fast blinking (green)
Fast blinking (green)
Fast blinking (green)