The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration, particularly if the outdoor unit is to be installed
in a location exposed to strong winds or at a height, the unit must be fixed to an appropriate support(wall or ground).
Fix the outdoor unit with anchor bolts.
NOTE
• The anchor bolt must be 0.79 inch or higher from the base surface.
Anchor bolt hole
A Type : AC009KXADCH
Anchor bolt hole
C Type : AC030/36MXSCCC
CAUTION
• Make a drain outlet around the base for outdoor unit drainage.
• If the outdoor unit is installed on the roof, you have to check the ceiling strength and waterproof the unit.