Advertisement
L
R
Match the "R" and "L" Cup Holders to the Child
11
Restraint, and insert the Cup Holder. Make sure the Lip fits
behind the groove and it clicks into place. Repeat this step
for the other Cup Holder.
Re-attach the Seat Back Pad by zipping the pad at the
13
top of the headrest. Then attach both hook and loop tabs to
the underside of the Headrest fabric below the pad.
Re-attach Shoulder Pad by folding the hook and loop
15
Tab over the Harness Strap. Secure both hook and loop
sides together. Repeat for the other Shoulder Pad and
make sure they are oriented, as shown.
LIP
Re-attach the Seat Bottom Pad, thread the crotch
12
strap through the correct opening in the pad. Then zip the
pad at the back and front of the Seat Bottom Pad.
Replace the Crotch Strap Pad by sliding the Harness
14
Buckle up through the Crotch Strap Pad. Then push the fabric
Tab through the slot on the FRONT of the Harness Buckle.
Then pull the Tab out of the BACK to secure it.
To attach the both Waist Belt pads, wrap one of the
16
pads around the Harness Waist Strap and attach the hook
and loop fasteners, repeat for the other Waist Belt pad.
6
Advertisement
