Technical Data; Intended Use; Safety Information - EINHELL Bavaria BOF 700 Operating Instructions Manual

Anl. BOF 700-1 GB,I,FIN
GB
1. Description of the machine
(Fig. 1 and 2)
1 Handle
2 Scale
3 Depth stop
4 Motor housing
5 Mains cable
6 ON/OFF switch
7 Thumb screw
8 Spindle
9 Clamping nut
10 Extractor socket internal Ø 36
(RP No.: 43.502.00.07)
11 Thumb screw
12 Routing base
13 Guide bush Ø 12 (RP No.: 43.502.00.03)
14 Collet Ø 8 and Ø 6 mm (RP No.: 43.502.00.02)
15 Base plate (RP No.: 43.502.00.04)
16 Scale (RP No.: 43.502.00.11)
17 Trammel point (RP No.: 43.502.00.09)
18 Parallel stop (RP No.: 43.502.00.12)
19 Guide roller (RP No.: 43.502.00.10)
20 Extractor adapter (RP No.: 43.502.0.08)
21 Spanner size 19 (RP No.: 43.502.00.06)
22 Spanner size 14 (RP No.: 43.502.00.05)
23 Universal stop (RP No.: 43.502.00.01)
24 Clamping handle
25 Speed selector

2. Technical data

Voltage:
Power consumption:
Idle speed:
Stroke/routing depth:
Collet:
For moulding cutters:
Safety insulated
Weight:
Sound pressure level LWA:
Sound power level LPA
Vibration aw:
4
05.07.2001 14:49 Uhr Seite 4

3. Intended use

The router is ideal for the processing of wood and
plastic, for the removal of knots, for the cutting of
grooves and recesses, and for the copying of curves
and lettering etc.
It is prohibited to use the router to process metal,
stone and similar materials.
The machine is to be used only for its intended pur-
pose.
Any use beyond its intended purpose is a case of
mis-use. Liability for damage or injury resulting from
such a case of mis-use shall rest with the user or
operator and not with the manufacturer.
4. Important information
Please read the operating instructions carefully and
note their contents. Use these operating instructions
to acquaint yourself with the machine, its proper use
and essential safety precautions. Keep the operating
instructions together with the router.

Safety information

Make sure the machine is switched off before
inserting the plug in the socket-outlet.
Clamp the workpiece securely to prevent it from
slipping.
Always run the cable away from the back of the
machine.
Always remove the plug from the socket-outlet
before doing any work on the machine
230 V - 50 Hz
Check that the cutter is fitted securely before
800 W
starting up the machine.
Always make sure of your footing while using the
16,000 - 28,000 rpm
machine.
32 mm
The direction of routing must always be opposite
to the cutter's direction of rotation.
Ø 8 and Ø 6 mm
Do not feed the cutter into the workpiece until it is
max. Ø 40 mm
running.
Always guide the router with both hands.
Never exceed the maximum speed specified for
3.3 kg
the cutter.
Make allowance for the machine's reaction torque,
93 dB(A)
particularly if the cutter jams.
103 dB(A)
When you are finished, allow the machine to glide
back into starting position.
7.1 m/s
2
Use only properly ground cutters.
Mount the cutter with friction locking.
Depending on the material, deeper cuts should be
performed in several passes.