Bench Dog Tools PRO-WOODWORKER Series Manual page 4

9. Install the drawers into the cabinet.
Carefully align the two slide halves, and gently push the drawer
into the cabinet.
10. Keep pushing!
You will encounter a fair amount of resistance just before the
drawer is pushed all the way in for the first time. This is OK!
Keep pushing until fully closed. The next time you open and
close the drawer, you will not feel this resistance.
Note: To remove the drawers, be sure to push the little
black levers, as you did in Step 5. You will not be able to
slide off the drawers unless you do this!
11. Fine adjust the drawer front reveals, if necessary.
To align the drawer front reveals, simply loosen the four bolts
that hold the drawer front to the drawer body and reposition the
drawer front. Then, retighten the bolts.
12. Retighten all bolts.
After a few hours of use, and from time to time, retighten all
bolts, as necessary.
Page 4
9
10
11