Advertisement
1. Screw the side panels to back panels, as shown.
Use (8) #8 x 1-1/2" pan head screws. Both drawers use the
same left and right side panels, and back panels. Build both
drawers simultaneously to save time. All panels have a groove
to accept the bottom panels. Position these grooves to the
inside of the drawers, as shown.
2. Slide in the bottom panels, as shown.
Do not glue the panels, just slide them in.
3. Attach the drawer fronts.
Use the (8) round head bolts and cross dowels. Install the cross
dowels before inserting the bolts. You will fine adjust the drawer
front reveals after you install them into your cabinet. Just snug
the bolts for now.
1/4-20 x 2"
round head bolt
4. Install the (2) drawer handles.
Use the hardware the comes with the metal drawer handles. Be
sure to place the (4) small flat washers under the handles.
#8 x 1-1/2" pan head screw
1/4-20"
steel cross dowel
Page 2
1
2
3
4
Advertisement
