Using The Strap; Inserting The Battery - Ricoh AF-100 Owner's Manual

(14) Film Take-up Spool
(15) Back Cover Lever
(16) Manual Film Rewind Switch

USING THE STRAP

INSERTING THE BATTERY

(CLICK HERE TO SEE FIG. 1 - 2)
Attaching the strap
1. Insert the loop at the end of the Strap under the Strap Holder. (Fig. 1 )
2. Insert the other end of the Strap through the loop and tie the Strap onto the Strap Holder.
(Fig. 2)
(CLICK HERE TO SEE FIG. 3 - 5)
The camera will not operate unless the battery is installed. It is important to ensure that the
battery is inserted correctly.
1. Open the Battery Compartment by pushing its latch with a pencil or pen point in the
direction of the arrow. (Fig. 3)
2. Insert the 6 volt lithium battery, checking that + and - on the battery are lined up correctly
according to the polarity diagram inside the battery compartment. (Fig. 4)
3. Close the Battery Compartment Cover by pushing it in the direction of the arrow. (Fig. 5)
(23) Film Chamber
(24) Sprocket