Symbol LS 9208 Quick Reference Manual page 7

Triggered, Single-line Scanning
In this mode, a single scan line displays.
1. Pick up the scanner. Press and then release the trigger. A
single scan line displays.
2. Aim the scan line at the desired bar code:
3. Depress and hold the trigger until either:
a. The scanner reads the bar code. The scanner beeps, the
LED flashes, and the laser turns off.
b. The scanner does not read the bar code and the laser
turns off.
4. Release the trigger. This causes the aim scan line to reap-
pear. To read another bar code in single-line mode, repeat
steps 2 and 3. This step can be repeated as often as desired.
5. After a programmable time period, the omni-directional scan
pattern displays. This indicates the scanner is ready to read
bar codes without use of the trigger.
L S
RIGHT
012345
9 2 0 8
WRONG
012345
4