Using The Water Filter (Not Provided) - Samsung SRF533DLS User Manual

Using the water filter (Not provided)

Connecting to water supply line
• Shut off the main water supply line and turn the Ice maker to the
off position.
• Locate the nearest cold drinking water line.
• Follow the instructions in the water filter installation kit.
• After connecting the water supply line to the Cartridge Holder inlet
and installing the Filter Cartridge (insert plastic line in fully).
• Turn on water supply and flush 3L into a bucket to clear the water
filter.
NOTE
• The water filter must be installed outside the refrigerator.
It is not provided with your new refrigerator. The filter cartridge (8)
and holder (9) kit can be purchased from the retailer where you
purchased this refrigerator.
• Do not use copper line.
• Cut the tubing, making sure the ends are square and clean.
Connect the water line to the fridge
• Connect the plastic line on the back of your fridge to the
cartridge holder outlet (fully insert the plastic line to the
cartridge holder outlet).
• Insert plastic clip to the cartridge holder inlet and outlet.
• Turn water on and check for any leakage.
NOTE
• You can purchase the necessary filter cartridge at the
retailer where you purchased this refrigerator. Make sure you
buy the SAMSUNG filter cartridge (Replacement cartridge
No : DA29-10105J) to ensure the best performance.
• Water line must be connected to drinkable water only
• A compression fitting and nut kit is supplied with the unit
and it is inside the fridge drawer.
• When pushing the Refrigerator back, make sure you don't
roll over the power cord or water line (Icemaker supply line).
NW2-FDR_DA68-01868A-26_EN.indd 25
1. Cold Water 5. Compression
Sleeve
line
6. Packing Nut
2. Pipe Clamp.
7. Shut Off Valve
3. Plastic line
8. Filter
4. Compression
Cartridge
Nut
9. Cartridge
Holder
90 degree
Incorrect Correct
Cartridge Holder
Clip
Plastic line (Provided) Filter cartridge
Setting up your refrigerator _25
7/3/2019 4:57:07 PM