Activating Or Deactivating The Sabbath Mode (Applicable Models Only); Activating Or Deactivating The Cooling Off Mode; Resetting Or Dismissing The Water Filter Replacement Alarm - Samsung RF5000C User Manual

Operations
Activating or deactivating the Sabbath mode (applicable models
only)
The Sabbath mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate or deactivate the Sabbath Mode, tap and hold
seconds. Then, when the display blinks, tap
- When the refrigerator is in the Sabbath mode, the buttons, display, and internal
lights do not function. The refrigerator and freezer, however, continue to cool.
NOTE
• If the refrigerator powers off and restarts (for example, if there is a power failure),
the Sabbath mode remains active. To end Sabbath Mode, you must deactivate it as
instructed above.

Activating or deactivating the Cooling Off mode

The Cooling Off mode (also called the Shop mode) is designed for retailers to display
refrigerators on a retail floor. In the Cooling Off mode, the refrigerator's fan motor and
lights operate normally, but the compressors do not run, so neither the refrigerator nor the
freezer becomes cold.
• To activate or deactivate the Cooling Off mode, tap and hold
for 6 seconds. Then, when the display blinks, press
- When the Cooling Off mode is on, the refrigerator chime sounds, and the refrigerator
shows "0" on the fridge indicator and "FF" on the freezer indicator.

Resetting or dismissing the water filter replacement alarm

The water filter replacement icon ( ) blinks to alert the user that it is time to replace
the water filter. You can replace the water filter immediately and reset the water filter
replacement alarm, or dismiss the alarm if you want to change the water filter later.
1. Tap any button ( ,
- This step may not apply to some models.
2. Tap until the Water Filter indicator blinks.
3. Tap or to select Reset or Later.
- If you have changed the water filter, tap
alarm.
- If you want to change the water filter later and dismiss the alarm, tap
4. Wait for 5 seconds or tap
- The Water Filter indicator stops blinking.
40 English
Untitled-1 40
, or ) to wake up the display.
to confirm your selection.
and simultaneously for 6
.
and
.
to reset the water filter replacement
simultaneously
.
2022-12-06 2:19:46