Removing The Freezer Accessories - Samsung SRF533DLS User Manual

Removing the freezer accessories

1. Pull Out Drawer
To remove - Pull the drawer out to full
extension.
Tilt up rear of drawer and lift
straight out.
(Refer to picture 1 & 2.)
Open the freezer door fully and remove
the drawer.
To replace - Place the drawer onto the
rails by tilting it up. Lower
the drawer into place until
it is horizontal and slide the
drawer in.
(Refer to picture 3.)
2. Freezer Drawer Bin
Swing-Type
To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it
out to remove.
To replace - Place the bin into the rail assembly.
When replacing, place the drawer bin holder into the hole of the rail.
Drawer-Type
To remove the drawer - Pull the drawer out fully. Tilt up the rear of the
To relocate the drawer - Place the bin into the rail assembly.
NW2-FDR_DA68-01868A-26_EN.indd 45
1
2
3
bin and lift it out to remove.
1
2
3
1
2
Operating your samsung refrigerator _45
7/3/2019 4:57:30 PM