TP-Link TL-WR850N User Manual page 66

Chapter 10
2. Select the wireless network mode or channel and click
effective.
Mode: Select the desired transmission mode.
• 802.11n only: Select only if all of your wireless clients are 802.11n devices.
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Note: When 802.11n only mode is selected, only 802.11n wireless stations can connect to the router. It is strongly
recommended that you select 802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can
connect to the router.
Channel: Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access
point.
Channel Width: Select the channel width from the drop-down list. The default setting is
Auto, which can adjust the channel width for your clients automatically.
Transmit Power: Select Low, Middle, or High to specify the data transmit power. The
default and recommended setting is High.
¾ To change the security option:
1. Go to Advanced
2. Select an option from the
parameters. The router provides four options, No Security, WPA/WPA2 Personal
(Recommended), WPA/WPA2 Enterprise, WEP. WPA2 uses the newest standard
and the security level is the highest. We recommend you don't change the default
settings unless necessary.
3. Click Save to make the settings effective.
> Wireless > Wireless
Security
Customize Your Network Settings
Save
Settings.
drop-down list and configure the related
to make the settings
62