Create Static Routes - TP-Link TL-WR850N User Manual

Chapter 10
Done!

10. 5. Create Static Routes

A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
I want to:
3. Click Add to create a new group.
4. Name the group.
5. Select LAN1 and LAN3 in
Wi-Fi 2.4G is viewed as a LAN interface.
6. Select the Enable Group Isolation
devices and disallow other devices from communicating
with them.
7. Click Save to make the settings effective.
Now your working devices connected to LAN1 and LAN3 are in
an isolated group!
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the internet
through Router A, but I also want to visit my company's network.
Now I have a switch and another Router B. I connect the devices
as shown in the following image so that the physical connection
between my PC and my company's server is established. To surf
the internet and visit my company's network at the same time, I
need to configure the static routing.
Customize Your Network Settings
Available LAN. Wireless network
check box to isolate working
56