TP-Link TL-WR850N User Manual page 31

300mbps wireless n router
Hide thumbs Also See for TL-WR850N:
Table of Contents

Advertisement

Chapter 6
2. Enter a range of IP addresses and port numbers to be controlled.
IP Range:
The field can be a single IP address or IP address range according to your
needs. If you set the IP Range to a single IP address, the computer with this IP address
will get independent given bandwidth. If you set the IP Range to an IP address range,
all computers in the range will share the given bandwidth.
Port Range:
Enter a range of port numbers to be controlled.
3. Select the protocol type for this rule.
4. Select a priority level for this rule. 1 is the highest priority level and 8 is the lowest
priority level. The total upload and download bandwidth will be allocated to guarantee
the minimal rate of all bandwidth control rules.
5. Enter the minimum and maximum upload bandwidth and download bandwidth
through the WAN port.
6. Select the
Enable This Entry
7. Click
Save
to make the settings effective.
check box.
Bandwidth Control
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents