Low Battery Indicator; Recharging The Phone; Preparing The Samsung Smt-W6100 To Make Calls - Samsung SMT-W6100 Getting Started Manual

Low Battery Indicator

When the battery is almost discharged and only a few minutes of talk time remain, the
battery sensor informs you in the following ways: an empty battery icon flashes (
hear a warning tone and a message repeats at regular intervals on the display.
When the battery becomes too weak for the phone to operate, it switches off automatically.

Recharging the Phone

Place the handset into the charger to recharge your phone's battery.
Preparing the Samsung SMT-W6100 to Make
Calls
1. Press and hold the power key until the phone switches on.
The phone searches for, and displays, the available wireless access points.
2. Select the name of the access point you want to which you would like to connect by
scrolling to it and pressing OK.
3. When the information about the access point is displayed, press OK.
If encryption is enabled on the access point, you will be prompted to select the WEP key
input type.
4. Select ASCII or HEX and press OK.
5. Enter your encryption key and press OK.
The phone will now obtain an IP address from the access point and download the
configuration files.
15
), you