Set Up Sdv5120; For Vhf/Fm Reception - Philips SDV5120/12 User Manual

Connect to the TV
1
One end of the coaxial cable is already
connected to the signal output of the
antenna.
2
Connect the other end to the input on the
TV receiver.
3
Connect the DC plug to the antenna and
the power supply to a 230-240V AC outlet.
Note
•
Ensure you position your antenna on a flat surface.
EN
6

4 Set up SDV5120

For VHF/FM reception

1
Extend the telescopic dipoles to the longest
possible length.
2
Turn the TV or FM radio to the desired
channel/station. Move the dipoles in
different directions up and down until the
reception is achieved.
3
To turn the amplifier up, rotate the gain
control knob towards the max position.