Set Up Sdv7120; For Vhf/Fm Reception; For Uhf Reception - Philips SDV7120 User Manual

4 Set up SDV7120

For VHF/FM reception

1
To turn the amplifier up, switch the gain
control towards the max level.
2
Extend the VHF rod antenna to the
longest possible length.
3
Turn the TV or FM radio to the desired
channel/station. Move the VHF rod
antenna in different directions up and
down until the reception is achieved.
Note
•
It is possible to switch the gain control level down for
best reception.
Note
•
To check the distance from the local TV broadcast
transmitters to your location, visit www.antennaweb.
org for more information.

For UHF reception

1
Turn the TV to the desired channel/
station.
2
To turn the amplifier up, switch the gain
control towards the max level.
3
Tilt or swivel the UHF log periodic
antenna towards the transmitter until the
reception is achieved.
EN
7