Damages; Tools And Equipment - NorthStar SiteStar Series Maintenance Instructions Manual

2.6 D
AMAGES
If the cabinet gets a dented area in size of a hand, with a depth of 10 mm,
the cabinet strength is reduced and has to be replaced.
If the door has been warped so much so that it can't close securely, it has
to be replaced.
3 T
OOLS AND
The following tools are required for the cabinet installation:
 8 mm wrench
 13 mm wrench
 18 mm wrench
 Allen wrench 5 mm
 Torque set 1 – 80 Nm
 Spirit level
 Screwdriver 0.4x2.5xL
 Screwdriver PZ #2
 Torx T20 screwdriver (only when changing from left hanged door to
 Torx T25 screwdriver
 Torx T30 screwdriver
 Torx T45 screwdriver
 Insulated tools for battery and busbar connections
 Insulation tape
Doc. No: D000100-INS-03, Rev D
E
QUIPMENT
right hanged door)
Page 10 of 36