Crt Housing Table (Gp5-R1Tb6) - Fujitsu PRIMERGY PG-R6RC1 User Manual

3.2

CRT Housing Table (GP5-R1TB6)

CAUTION
• Contact our service engineers before replacing the display unit. Improper or
careless replacement of the display unit may result in dropping the display,
leading to potential injury.
3.2.1 Components
Item: Quantity
CRT housing table: 1
M6 screw: 10
CRT signal extension cable/
power cable: each 1
Belt: 2
3.2.2 Mouting to the rack
1
Assemble the right and left rails.
Description
Table to install 15-inch CRT/LCD in the rack
To secure the CRT table to the rack
Connect CRT by using these cable when the Cables
included in CRT kit are short.
To fix the display to the table
Screws
3 Handling the rack after installation
E
63