Panasonic KX-TCD450 Series Service Manual page 70

KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT
Address Default
09F2 00
09F3 21
27.3.3. Flash Time setting
Address Default
0F0B 08
0F0C 14
0F0D 46
27.3.4. Clip (Caller ID) configuration
Address Default
0F1C 70
0F37..38 3D 01
0F3D 00
Name Country
Setting
HsRegInfo.EmcFlags
RingMode
Name
CalibBreakTime[0]
CalibBreakTime[1]
CalibBreakTime[2]
Name
Detect
Parse.Configuration
Rcid.Mode
Type
x D Handset registration info - EMC flags
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
x D Ring mode. Modes used in KAMMA4 are 20h and 21h.
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
Country Type
Setting
0A D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 80 ms
46 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 200 ms
14 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 700 ms
Country Type
Setting
74 D CLIP detect configuration
Bit
0-2: Mode: 0: Learn mode, 1: DTMF only, 2: FSK
only, 3: Generic mode, 4: Russian CLIP only
3: Unused4
4: Onhook: 1=enable 0=disable
5: Offhookk: 1=enable 0=disable
6: Msgwaiting: 1=enable 0=disable
7: Unused7
3D 00 D Clip parse set configuration
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: ProtocolPriority:
If 2 mutually exclusive parameters occurs, the 1st in
the protocol message has priority.
1=enable 0=disable
9: UseCallType:
Verify the Call Type parameter, if available, when
receiving Call Back CLIP at busy subscriber.
1=enable 0=disable
10: AddTop0IfNo0
Automatic addition of 0 if top of Caller ID is not 0.
1=enable 0=disable
11: DtmfDigitsOnly
Parse DTMF clip without start and/or stop code.
1=enable 0=disable
12..15: Reserved12..Reserved15
x D RCID mode
Bit
0: answer-mode,
1=auto-answer, 0=manual answer
1..4: 0
5: detect length,
1=enable(development only), 0=disable
6: add category,
1=enable(development only), 0=disable
7: 0
70
Description
Description
Description