EN
DC 9V
ON/OFF
DC 9V
ON/OFF
DC 9V
ON/OFF
6
Installation
For basic installation, see
the quick start guide that
came with your Wireless
TV Link.
Install the remote control blaster cord
1 Switch off the transmitter (A).
2 Connect the remote control blaster cord (E) to the
1 2 3 4
IR socket.
3 Position the blaster light in front of the video source.
See the user manual of the video source
for the exact location of the IR sensor
on the front panel.
4 Switch on the transmitter (A).
5 Take the remote control of a video source with you.
6 Go to TV2.
7 Switch on TV2.
8 Switch on the receiver (B).
9 Select the correct SCART input on TV2.
10 Operate the video source with its remote control.
3
Enjoy