Check Play Of Turbocharger Rotor; Clean, Check Turbocharger; Clean Engine Breather Element; Check Vibration Damper - Komatsu Super D155AX-3 Operation & Maintenance Manual

Bulldozer
Table of Contents

Advertisement

24. SERVICE
PROCEDURE
24.7.2 CHECK PLAY OF TURBOCHARGER
ROTOR
Contact your Komatsu
distributor
to have the play checked.
24.7.3 CLEAN, CHECK TURBOCHARGER
Contact your Komatsu
distributor
for cleaning
or inspection.
24.7.4 CLEAN ENGINE BREATHER ELEMENT
Wipe
off all the dirt around
breather
0.
1.
2.
3.
4.
Remove
breather
0.
Wash the whole
breather
in diesel oil or flushing
oil, then blow
it dry with compressed
air.
Replace the breather
O-ring with a new part, coat with engine oil,
I
u
AD053940
and install it.
24.7.5 CHECK VIBRATION
DAMPER
Check that there are no cracks or peeling
in the outside
surface
of the rubber.
If any cracks or peeling
are found,
contact
your Komatsu
dis-
tributor
to have the parts replaced.
24.7.6 CHECK ALTERNATOR,
STARTING
MOTOR
The brush may be worn,
or the bearing
may have run out of
grease, so contact your Komatsu
distributor
for inspection
or repair.
If the engine
is started
frequently,
carry out inspection
every
1000 hours.
24.7.7 CHECK ENGINE VALVE CLEARANCE,
ADJUST
Contact your Komatsu
distributor
for inspection
or adjustment.
3-74

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents