Grease Equalizer Bar Center Pin (1 Place); Power Tilt Dozer; Lift Cylinder Support Yoke (4 Places); Lift Cylinder Support Shaft (2 Places) - Komatsu Super D155AX-3 Operation & Maintenance Manual

24. SERVICE PROCEDURE
l Grease equalizer bar center pin (I place)
1. Open the engine side cover at the left side of the machine, then
remove 2 bolts 0.
2. Pull hinged cover @ out and open it.
3. Add grease through the grease fitting marked by the arrow.
4. Return hinged cover @ to its original position, install bolt 0 to
hold it in position, then close the engine side cover.
l Power tilt dozer
AD054220
1. Lift cylinder support yoke (4 places)
2. Lift cylinder support shaft (2 places)
3. Blade arm (2 places)
4. Tilt cylinder ball joint (I place)
5. Tilt brace ball joint (I place)
6. Blade center link (1 place)
7. Tilt brace thread (1 place)
3-57