Led State Description; Overview; Led Status For 9764 Cmco - Alcatel-Lucent 9764 Series Manual

LED state description

....................................................................................................................................................................................................................................

LED status for 9764 CMCO

Overview

This topic describes the LED status on the 9764 CMCO device.
Location of LED
The following figure shows the location of the LED on the back of the 9764 CMCO:
Figure C-1 Location of LED
Hardware LED interpretation table
The following table describes the possible states for the single bi-color LED:
State
Power off
Initial state
Software downloading during
system initialization
Failure
9764 MCO LTE becomes
operational
LED
Description
Power off
Power on or Restart
Software downloading
9764 MCO LTE start-up or operational failure
9764 MCO LTE becoming operational
Use pursuant to applicable agreements
LED status for 9764 CMCO
LED
OFF
ON (Red)
Blinking
(Green)
ON (Red)
ON (Green)
(Note: LED is
switched OFF
after 15 minutes
of stable
operation)