Table of Contents
Advertisement
SD video-mode
Picture 2
q
Format
4:3
Movie expand 16:9
Wide screen
Z
Zoom
Â
Zoom factor
VGA-mode + HD video mode
Picture 2
q
(Format)
4:3
Wide screen
Z
Zoom
Â
Zoom factor
‹
(Shift)
S
(Clock frequency)
fi
(Phase)
X
(Auto align)
4:3 VGA-mode
SD video-mode
4:3
Wide screen
Movie expand 16:9
Wide screen
4:3
&
é
Picture 2 menu
Zoom
Select
to activate the zoom function.
Zoom On
You may also activate the zoom function with the
the remote control.
If no zoom is active, press the cursor left/right, up/down to select which part
of the screen will be zoomed.
Zoom factor
Select
and press the cursor left/right to adjust the zoom factor
Zoom factor
and to change the magnification of the picture.
If zoom is not active, changing the magnification factor will have no effect on
the displayed picture.
Format (only available in 4:3 VGA mode and SD video mode)
Select
to summon a list of available display formats.
Format
Press the cursor up/down to select another display format: 4:3,
Movie expand 16:9 or Wide screen.
Note: Movie expand 16:9 is not available in VGA mode.
Shift (only available in VGA mode on VGA1 or VGA2 and in one of the HD modes.
See Connect Peripheral Equipment, p. 9.)
This control allows you, when necessary, to move the picture in a horizontal
or vertical way.
Use the cursor left/right, up/down to adjust.
Press the OK button when done.
Clock frequency (only available in VGA mode on VGA 1 or VGA 2.
See Connect Peripheral equipment, p. 9.)
This control allows you, when necessary, to adjust the values of the clock
frequency so that especially text can be displayed with an optimal overall
sharpness.
Use the cursor left/right to adjust.
Phase (only available in VGA mode on VGA 1 or VGA 2.
See Connect Peripheral equipment, p. 9.)
This control allows you, when necessary, to adjust the pixel phase of the
picture to avoid picture interference.
Use the cursor left/right to adjust.
Auto align (only available in VGA mode on VGA1 or VGA2 and in one of the HD
modes. See Connect Peripheral Equipment, p. 9.)
This control allows you to automatically adjust the shift, the clock frequency
and the phase in VGA mode and the shift in HD modes.
Press OK to execute.
button on
ZOOM ON/OFF
Use of the menus
7
Advertisement
Table of Contents
