Osd Menu Overview; Picture Menu; Screen Menu - Philips C Line 75BDL6051C User Manual

6.2.

OSD Menu Overview

6.2.1. Picture menu

Brightness
Adjust the brightness of this display's backlight.
Contrast
Adjust the contrast ratio for the input signal.
Sharpness
Adjust the sharpness to improve the image detail.
Black level
Video black level is defined as the level of brightness at the
darkest (black) part of a visual image. Adjust the black level
of this display.
Tint
Adjust tint of the screen.
Press [ ] button to make the tone color greenish. Press [ ]
button to make the tone color purplish.
NOTE: This item applies to Video mode(YUV color space)
only.
Color
Adjust the intensity of colors in the image.
NOTE: This item applies to Video mode(YUV color space)
only.
Noise reduction
Reduce picture noise. You can select a suitable noise
reduction level.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE: This item applies to Video mode(YUV color space)
only.
Gamma selection
Gamma is what controls the overall brightness of an image.
Images which are not corrected properly can appear too
white or too dark, so controlling the gamma properly can
have a huge influence on the overall picture quality of your
display.
The options are: {Native} / {2.2} / {2.4} / {S gamma} /
{D-image}.
Color temperature
Select a color temperature for the image. A lower color
temperature will have a reddish tint, while a higher color
temperature gives off a more bluish tint.
The options are: {3000K} / {4000K} / {5000K} / {6500K} /
{7500K} / {9300K} / {10000K} / {Native} / {User 1} / {User 2}.
Color control
You can adjust the color tones of the image precisely by
changing the User-R (Red), User-G (Green) and User-B
(Blue) settings independently.
{Picture} - {Color temperature} - {User} setting to [User 1]
Or, you can adjust the color tones per 100K in the range of
2000K to 10000K.
{Picture} - {Color temperature} - {User} setting to [User 2]
Over scan
Change the display area of the image.
• {On} - Display about 95% of the original size of the
image. The rest of the areas surrounding the image will
be cut off.
• {Off} - Display the image in its original size.
Picture reset
Reset all settings in the Picture menu.

6.2.2. Screen menu

H position
Press the [ ] button to move the image to the right, or [ ]
to move the image to the left.
NOTES:
• H position adjustment applies to VGA input only.
• H position cannot be adjusted when {Pixel Shift} is
activated.
V position
Press the [ ] button to move the image up, or [ ] to move
the image down.
NOTES:
• V position adjustment applies to VGA input only.
• V position cannot be adjusted when {Pixel Shift} is
activated.
Clock
Adjust the width of the image.
NOTE: This item applies to VGA input only.
Clock phase
Adjust to improve the focus, clarity and stability of the
image.
NOTE: This item applies to VGA input only.
33
75BDL6051C 86BDL6051C