1.4.8 Change ON/OFF setting for duplex printing
This function allows you to change the duplex printing setting to ON or OFF. The setting
applied is reversed each time this mode is entered.
The setting currently applied can be determined by pressing the [Go] seven times and
checking the LED status after several seconds.
Toner and Drum LEDs light for one
second.
LED does not light
<Operating Procedure>
(1) Open the front cover while the power switch is turned OFF.
(2) Press and hold the [Go], and turn ON the power switch. The Toner, Drum, and Paper
LEDs light.
(3) Release the [Go]. All LEDs go out.
(4) Press the [Go]. The Toner, Drum, and Paper LEDs light.
(5) Press the [Go] seven times. Toner, Drum, and Paper LEDs go out in a second and the
duplex printing setting is changed to ON or OFF. Close the front cover. When the setting
is completed, the machine returns to the ready state.
1.4.9 Change A4/Letter setting for paper size
This function allows you to change the default paper size setting to A4 or Letter. The setting
applied is reversed each time this mode is entered.
The setting currently applied can be determined by pressing the [Go] eight times and
checking the LED status after several seconds. When the setting is completed, the machine
returns to the ready state.
Toner and Drum LEDs light for one
second.
LED does not light
<Operating Procedure>
(1) Open the front cover while the power switch is turned OFF.
(2) Press and hold the [Go], and turn ON the power switch. The Toner, Drum, and Paper
LEDs light.
(3) Release the [Go]. All LEDs go out.
(4) Press the [Go]. The Toner, Drum, and Paper LEDs light.
(5) Press the [Go] eight times. Toner, Drum, and Paper LEDs go out in a second and the
paper size setting is changed to A4 or Letter. Close the front cover. When the setting is
completed, the machine returns to the ready state.
LED
Duplex printing OFF → Duplex printing ON
Duplex printing ON → Duplex printing OFF
LED
A4 → Letter
Letter → A4
Duplex printing setting
Default paper size setting
5-47
Confidential