Getting Started; Insert The Sim Card And Battery - Philips CTS800/000APMEA User Manual

Mobile phone
Hide thumbs Also See for CTS800/000APMEA:
Table of Contents

Advertisement

S800_EN.book Page 4 Friday, February 10, 2006 6:46 PM

1. Getting Started

Please read the safety instructions in the "Precautions"
section before using your phone.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription information, your
mobile phone number and a memory in which you
can store phone numbers and messages (for more
information, see "Phone Book").

Insert the SIM card and Battery

Follow the steps below to insert your new SIM card.
Remember to switch off your mobile phone before
removing the battery.
Remove the battery
To insert the SIM card, you must first remove the
battery. Pull and hold the locking catch (1) at the back
of the phone, lift up the back cover and remove it.
4
Insert the SIM card
Slide the SIM card into the SIM card slot, making
sure that the clipped corner of the card is pointing the
right direction and that the gold contacts are facing
downwards.
Place the battery back to its slot, with the gold
contacts facing downwards until it snaps into place.
Getting Started

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cts800/bs1ua0hcS800

Table of Contents