Table of Contents
Advertisement
2. Gently slip the card into the mini-SD card slot
and press it down until the card locks into place.
To remove the mini-SD card, push down the card into
its slot and release it. The card will spring out of the
slot.
Switching on the phone
To switch on the phone, long-press the ) key. Enter
the PIN code if required. A PIN code is a 4- to 8-digit
secret code for your SIM card. It is preconfigured and
communicated to you by your operator or retailer. For
more information on PIN codes, see "Security" on
page 51.
If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
8
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
Set date
To set the current date.
Set time
To set the current time.
Time zone
To select your time zone.
See "Settings" on page 50 for details on these three
items.
Copy SIM
If your phone detects any names
names into
and telephone numbers in the SIM
the phone?
card phonebook, you will be asked
if you want to copy them into the
onboard phone book. If you wish
to copy the numbers, press OK,
otherwise press Cancel.
Charging the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
On
alert is
(see "Sounds alerts" on page 51).
Once the battery and battery cover are back in place
you can charge the phone. Pull away the protective
rubber cap covering the charger connector. Plug in the
Getting Started
Advertisement
Table of Contents
