Setting Hotkeys - Philips CT7568/000APMEA User Manual

Philips xenium ct7568 9@9t
Table of Contents

Advertisement

connector as shown below. Then plug the other end
into a main AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 2.5 hours to fully recharge your mobile
phone. When all the scroll bars are steady the battery
is fully charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time goes up to 8.5 hours and stand-by time up to 1
month.
Keeping the charger plugged to the mobile when the
battery is fully charged will not damage the battery.
The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
Getting Started

Setting Hotkeys

You can configure the numeric keys 2 to 9 to
access your favourite features simply by long-pressing
on the numeric key. A number of hotkey shortcuts are
pre-configured.
For
"Shortcuts" on page 56.
more
information,
see
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct7568/bbcca8cnXenium 9@9t

Table of Contents