Table of Contents
Advertisement
3-8-2. EDID Input method
1. Excute "WinDDC.exe"
2. Click "Sys Config"
Select "Station : Write station"
Check "Serial No and Week : Don't change"
Click "Save"
3. Click "Open" icon.
Select "Connected Port #1" and Next "OK".
* File Name - SM215TWA.DDC
SM215TWD.DDC
Press enter key on your keyboard.
4. Confirm the "DDC OK"
Figure 4. stage of EDID Input
3 Alignments and Adjustments
3-5
Advertisement
Table of Contents
