Changing The Pin Code; List Of All Handsets Registered To The Base Station (Rc Code); Renaming A Handset; Cancelling The Registration Of A Handset To The Base Station - Philips TD6726/BG051P User Manual

6.4 Changing the Pin code

This code will be requested for remote control of the answer phone or for telephone
configuration. (see "6.3 Activating/ deactivating Pin code protection", page 49).
The default Pin is printed on the back of the base station (RC code). To change it,
proceed as follows:
Go to the "SETTINGS" menu, then to the "Security" sub-menu, and select
"Change Pin code"; "Enter new Pin:" is displayed.
Enter the new security code, then confirm by pressing the
PIN" is displayed.
To confirm, enter the new security code once again, then confirm by pressing
the key; "Stored" is displayed.
: Be careful not to forget this code.

List of all handsets registered to the base station (RC code)

This list indicates the name and number of each handset and base station.

Renaming a handset

With this function you can rename your handset (e.g.: ROOM1, KITCHEN, ...).
Go to the "INTERCOM" menu, and select the handset to be renamed from the
list, using the scroll keys
Press the key to confirm your choice.
"Rename" is displayed, confirm by pressing the
Press the
name.
Confirm by pressing the

Cancelling the registration of a handset to the base station

Go to "INTERCOM", and select the handset to be cancelled.
Press the key to confirm your choice.
Select "Cancel registration" and confirm by pressing the
The handset starts searching for another active base and reverts to "standby mode".
50
and
key for 2 seconds in order to delete the text, then enter the new
key again.
System configuration
.
key.
key; "REPEAT
key.