Safety Instructions - Viessmann Vitomax LW M64 Installation Instructions Manual

Low pressure hot water boilers
Hide thumbs Also See for Vitomax LW M64:
Table of Contents

Advertisement

Safety instructions

Please follow these safety instructions closely to
prevent accidents and material losses.
Safety instructions explained
Danger
This symbol warns against the risk of injury.
!
Please note
This symbol warns against the risk of material
losses and environmental pollution.
Target group
These instructions are exclusively intended for quali-
fied contractors.
Work on gas installations must only be carried out by
a registered gas fitter.
Work on electrical equipment may only be carried
out by a qualified electrician.
The commissioning must only be carried out by
trained specialist personnel in accordance with the
Viessmann operating and service instructions.
Regulations to be observed
Pressure Equipment Directive
Health and Safety at Work Act (BetrSichV) [Ger-
many] and extended technical rules for operational
safety (TRBS)
Country-specific safety regulations for the installation
site
Working on the system
Close the fuel shut-off valve and secure against
unintentional reopening.
Isolate the system from the power supply, e.g. by
removing the separate fuse or by means of a mains
isolator, and check that it is no longer 'live'.
Safeguard the system against reconnection.
2
Note
Details identified by the word "Note" contain additional
information.
National installation regulations
Statutory regulations for the prevention of accidents
Statutory regulations for environmental protection
Codes of practice of the relevant trade associations

Advertisement

Table of Contents
loading

Table of Contents