Install And Charge The Handset Batteries - Philips SE1453B/05 User Manual

Plug the other ends of the
2
line cord and power cable
into the telephone socket
and mains power socket.
3. 3 Install and charge the
handset batteries
Warning
• The handset must be charged
for at least 24 hours before
using it for the fi rst time.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
Your SE145 is supplied with
two rechargeable batteries.
Slide off the battery door
1
(if fi tted).
Getting started
Insert the batteries as
2
indicated and slide the door
back on.
Place the handset face up
3
on the base to charge.
A beep confi rms the handset
is placed correctly and
charging will begin.
When there is enough
4
power in the batteries, the
handset will automatically
register with the base.
The standby screen is
displayed. Or if the display
shows
the country grouping for your
area.
you must select
15