Conformity; Using Gap Standard; Compliance - Philips SE1453B/05 User Manual

• Do not let small metal
objects come into contact
with the product. This can
deteriorate audio quality and
damage the product.
• Handsfree activation could
suddenly increase the volume
in the earpiece to a very high
level : make sure the handset
is not too close to your ear.
• Refer also to the Cautions
in chapters and subchapter
sections.

1.2 Conformity

Hereby, Philips Consumer
Electronics, declares that this
SE145x is in compliance with
the essential requirements and
other relevant provisions of
Directive 1999/5/EC.
The declaration of conformity
is available at :
www.p4c.philips.com.
This product can only be
connected to the analogue
telephone networks of the
countries mentioned on the
packaging.
Important

1.3 Using GAP standard

compliance

The GAP standard guarantees
that all DECT GAP handsets
and base stations comply with
a minimum operating standard
irrespective of their make.Your
handset and base station are
GAP compliant, which means the
minimum guaranteed functions
are : register a handset, take the
line, receive a call and dial.
The advanced features may not
be available if you use another
handset than a SE140/145 with
your base station. To register
and use your SE140/145 handset
with a GAP standard base
station of a different make,
fi rst follow the procedure
described in the manufacturer's
instructions, then follow the
procedure described on page 34.
To register a handset of
another make to the SE140/145
base station, place the base
station into registration mode,
then follow the procedure in
the manufacturer's instructions.
5