Easy Registration; Unregister; Reset Unit - Philips SE4552B/17 User Manual

Note
By default, the PIN is 0000.
On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
Note
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
On the handset, press m, scroll n
to Advanced Set and press o
Select.
Scroll n to Register and press o
Select.
Enter the PIN when prompted and
press o OK to confirm.
Registering... is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.

10.6.1 Easy registration

Insert the unregistered handset in
the base station to automatically
begin registration.
Registering... is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
50
Note
The easy registration is possible only
when PIN has not been changed and is
still the default PIN 0000.
10.7

Unregister

Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to Unregister and press
o Select.
Enter the PIN when prompted and
press o OK to confirm.
Scroll n to select the handset
number to unregister and press o
Select. Press o OK to confirm.
• A validation tone is emitted to
indicate successful unregistration.
Note
A registered handset other than one of
the model described in this manual can
only be unregistered using a handset
described in this manual.
10.8

Reset Unit

You can reset your phone to its default
settings with this feature. (see 10.14
"Default Settings")
Caution
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
Note
You may have to configure your phone
once again.
Advanced settings