Philips CD2451S/51 User Manual page 45

• Line adaptor is required: Connect the
line adaptor to the line cord.
Caller does not hear me clearly!
• Move closer to the base station.
• Move the base station at least one
metre away from any electronic
appliances.
Frequent noise interference on my
radio or television!
• Move the base station as far away as
possible from the electrical appliances.
Product behaviour
Keypad does not work!
• Unlock your keypad: Long press
in idle mode.
The handset warms up when
making a long call!
• This is a normal behavior. The handset
consumes energy while calling.
The handset cannot be registered to
the base station!
• Maximum number of handsets (6) has
been reached. To register a new
handset, unregister an existing
handset.
• Remove and replace the handset
batteries.
• Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see "Registration"
on page 32).
Caller number is not displayed!
• Service is not activated: Check your
subscription with your network
operator.
Frequently asked questions
My handset keeps going into idle
mode!
• If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
idle mode automatically when you place
the handset back on the base station.
Phonebook entry cannot be stored
and
MEMORY FULL
• Delete an entry to free memory
before saving your contact again.
The Master PIN code is wrong!
• The default master PIN is 0000.
• Reset the handset to revert to the default
master PIN code if it has been changed
*
before (see "Reset Unit" on page 33).
The answering machine does not
record messages!
• Memory is full: Delete your old
messages.
• The
ANSWER ONLY
activated. Deactivate
and activate
"Set the Answer mode" on page 36).
Remote control access does not
work!
• Activate Remote Control Access (see
"Remote Control Access" on page 38).
The phone hangs up during remote
access!
• You have taken more than 4 seconds
to enter the Master PIN code. Enter
the code again within 4 seconds.
Answering machine stops before
the recording is finished!
• Memory is full: Delete your old
messages.
is displayed!
mode has been
ANSWER ONLY
mode (see
ANSWER & REC
43