Verifying The System Requirements; Front Panel And Connector Pinouts - National Instruments FlexRIO NI 6581B Getting Started Manual

Table 1. NI FlexRIO Documentation Locations and Descriptions (Continued)
Document
NI FlexRIO Help
LabVIEW Examples
IPNet
NI FlexRIO product
page

Verifying the System Requirements

To use the NI FlexRIO Adapter Module Support instrument driver, your system must meet
certain requirements. For more information about minimum system requirements,
recommended system, and supported application development environments (ADEs), refer to
the NI FlexRIO Adapter Module Support Readme, which is available on the NI FlexRIO
Adapter Module Support software DVD or online at ni.com/updates.

Front Panel and Connector Pinouts

The following figure shows the digital data connector (DDC) pin assignments for the
NI 6581/6581B. Refer to the NI 6581/NI 6581B Specifications for signal information.
4 | ni.com | NI 6581/6581B Getting Started Guide
Location
Available from the Start menu
and at ni.com/manuals.
Available in NI Example
Finder. In LabVIEW, click
Help»Find Examples»
Hardware Input and
Output»FlexRIO.
ni.com/ipnet
ni.com/flexrio
Description
Contains information about the
FPGA module, adapter module,
and CLIP configuration
information.
Contains examples of how to run
FPGA VIs and Host VIs on your
device.
Contains LabVIEW FPGA
functions and intellectual property
to share.
Contains product information and
data sheets for NI FlexRIO
devices.